Your position >> Products&Technologies >> Rubber repair & Seal

Rubber repair & Seal

Application instructions

Rubber repair: In the mining industries, if not repaired timely the local scratch or abrasion of conveyor belt, rubber tape(tube), various rubber blades & rollers due to accidental or unavoidable emergency, which will easier to cause the serve abrasion and make influence on equipment long-term usage.

High temperature sealing material: Paste luting agent/sealing material for industrial use wherever conditions of temperature combined with pressure on smooth, plane sealing surfaces (butt joints) make extreme demands on the quality of the sealing compound.

Application ranges

• Repair damaged conveyor belt, rubber belt, rubber tubing and various rubber blades.
• Repair scratching rubber rollers, all kinds of tire casings and inner tubes.
• Sealing of metallic joints in steam and gas turbines, compressors, generators, expanders, pumps, flange,
joints, etc.

Material performance

• Excellent adhesion, bonds to all rubber and hard surface.
• Super flexibility.
• Excellent abrasive resistance.
• Excellent chemical resistance.
• Withstands hot steam and air, hot and cold water, light fuel oils and lubricants, as well as crude oil and natural gas at temperatures of up to 900 ºC.
• The adhesion on sealing surfaces and butt joints is so high that a one hundred percent seal is guaranteed even for pressures up to 250 bar.
• The pressure resistance for flanges without sealing rings is guaranteed up to 450 bar, and even up to 550 bar for screw joints.

Technical data

Package & storage: two parts or one parts; shelf life is 1-10years
Curing time @24 ºC
Initial curing time: 2-5hr
Full chemical resistance: 8-48hr (Curing time reduced by half when temperature increased by 11ºC)
Temperature: 200-500 ºC
Adhesion(steel surface after grit blasted): 210 kg/cm²
Hardness shore D (ASTM D-2240): 30-90
Tensile strength (ASTM D-638): 100-120 kg/cm²
Elongation: 300-600%


Picture1: Repair rubber conveyor belt

Picture2: Repair riser rubber roller 

Picture3: High temperature sealing material applied on Steam turbine

  clicks:2006  Entry time:2012-08-23 【Print this page】 【closed